FREE Shipping all over the USA, CA, UK, and HK!

Bonsai Concave Cutter

USER GUIDE

Model No.: FS-CC200

Sep. 28th, 2020
The Second Edition

Before Use


Thank you for purchasing our Wazakura Bonsai Concave Cutter. Please read this user guide before use.

How to Use

Concave cutter is a designated tool to cleanly cut bonsai branches from its base.
Grab the cutter by its handles, carefully open and guide the edges so the base of the branch to be cut is between them. Close the handles to cut.
*Use for other purposes under your own risk.

How to Care

1) Clean dirt, sap or any moisture after each use. If necessary, use a rust eraser to remove light coatings of rust.

2) Wipe it dry with clean rag, and then oil to protect the metal from corrosion regularly. Ideally, blades should be cleaned and oiled after each use, using a mineral or petroleum low viscosity oil.

Long-time Storage

Cover the blades with a case or fabric and keep it in a well-ventilated place with low moisture.

Specifications


Size 7.87 x 1.96 x 0.78in (200 x 50 x 20mm)
Weight 6.7oz (190g)
Material S55C Carbon Steel
Origin Made in Japan (Niigata prefecture – Sanjo city)
Remark Suitable Cutting Capacity: 5/16″ to 1/2″ (8mm to 13mm)

Important Safety Instructions


Cautions

・Do not touch the blade directly with your hands or wield against others.

・ Do not hold by the blade and carry.

・ The blade is very sharp, please handle with care, supervise children, and instruct them in proper use.

・ Clean dirt, sap or any moisture on the scissors after each use. It causes the rusts to the scissors.

・ Do not use it to cut wires. It causes a damage to the blade.

 

Warranty

3 Month Warranty

Contact

Wazakura Japan

Email: wazakura.info@3rrr-hd.jp

Web: https://wazakurajapan.com/pages/contact

1-14-34-2F Hakataekihigashi, Hakata-ku, Fukuoka, 812-0013, JAPAN

和桜 又枝切 (華吹雪)


取扱説明書

型番: FS-CC200

2020.09.28
第2版

※デザイン及び仕様については、改良のため予告なしに変更する場合がございます。

ご使用の前に


「和桜 又枝切 (華吹雪)」をお買い求め頂き、誠にありがとうございます。本製品のご使用前に、本書をご一読ください。

お手入れ・保管方法

① 使用後は、刃・柄についた水分や汚れを布でよく拭き取ります。万一、汚れが酷い場合は錆・樹液落としメンテナンス用品(クリーンメイトなど)をご一緒に使用ください。

② 錆を防ぐために、よく乾燥させた後、錆止め油を刃部全体に塗ってください。

長期間使用しない場合

・ケースや布などで刃全体を覆って風通しの良い場所に保管します。

製品仕様


サイズ 200 x 50 x 20mm
重さ 190g
素材 S55C 極軟鉄
生産地 日本
切断できる枝のサイズ 約8.33~12.5mm

安全上のご注意


ここに記載された注意事項は使用者やまわりの方への危害損害を防止するためのものです。各項目をよくお読みになり必ず守ってご使用ください。

注意

・ 刃先を素手で直接触らないでください。

・ 刃部を持って持ち運びはしないでください。

・ 落としたり、乱暴な扱いはしないでください。

・ 子供の遊び道具にしないでください。

・ 樹を切った後は、樹液が付着します。水分や汚れは錆の進行の原因となりますので、使用後はを必ず拭き取ってお手入れをしてください。

・ ワイヤーを切るのに使用しないでください。刃が欠ける原因となります。

企業情報とサポートについて


お問合せ窓口

製品保証:ご購入日から3ヵ月間

※販売店の納品書など、購入日がわかる書類の保管をお願い致します。

本製品に関するお問合せは、下記サポートセンターもしくは、販売店へお問い合わせ下さい。

Wazakura Japan株式会社

wazakura.info@3rrr-hd.jp

Web: https://wazakurajapan.com/pages/contact

〒812-0013 福岡県福岡市博多区博多駅東1丁目14番34号2F